Make Your Own 2-Part Wood Bleach ..CHEAP! : 8 Steps

Table of Content

• Step 7: Storage
• Wood Bleach - 946 ml
• Step 1: Making Part 1
• Step 3: Pouring Part 2
• Be the First to Share

In some states now if you mix the 2 together they gel instantly, ruining the entire mix. Something about consumer safety I'm sure. I have used them separately and they worked fine as well but I also like mixing them together first. Steve you may have got a really old batch that didn't work anymore. Definitely MUCH more powerful than Clorox orOxalic Acid. You'll notice that the grain is detectable through the surface.

It has that look of wood grain, but the colors needed to play a board game.

Step 7: Storage

I just did some samples on rustic white oak that were bleached first and then finished to mimic aged wood. Because both Hydrogen Peroxide and Sodium Chloride are caustic, you'll want to make sure you keep them away from things that are concrete and metal. If you like what you've achieved, now is the time to spray part 3, further allowing it to dry. Javascript is required to view Recently ViewedStay in the know with exclusive deals and event updates. This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Hello all, My current quandary is trying to find 2 part wood bleach. But it has become very difficult to find a source in Minnesota that will sell this product. I can find a few online vendors that will sell a 2 gallon kit, but what I need is a pint kit. I assume the legions of wood finishers can help to direct me to a source.

Wood Bleach - 946 ml

The first part, and the part you'll apply first to your wood, is a mixture of 4 ounces of Sodium Hydroxide to a little less than 4 cups of distilled water. It's also important that all mixing is done outside and with the correct gear on. Do not put your face over the jar of liquid as it does create fumes (don't ask me how I know).

I've just never had an occasion where clorox didn't work for my so I quit trying to use the two part bleach. I've been thinking about why you might have not had good results.The 2 part bleach comes in two separate containers. You can't apply part "A", and then on top of that apply part "B". The two parts need to be mixed together before application. We have Kleen Strip at the shop right now I believe.

Step 1: Making Part 1

If you want it to be lighter, you'll go back to the Part 2 bottle and spray it again. Believe me, there are enough crystals from part 1 to cause a few reactions. It comes in 8oz bottles (part A & B) for around $7.00, the problem is I don’t think they will ship it; I had to drive 35 Miles one way to pick it up!! If you know someone close to the store, have them pick it up and send it to you.

It is ideal for removing the greying effect that results from weathering and exposure to sunlight. Circa 1850 wood bleach lightens all wood types, including walnut, mahogany, and teak, as well as wood that has darkened from age. I like to give it a full 24 hours to dry as wet wood will generally look dark. I guess, in a pinch, you could use a heat gun to dry the wood, but don't go quoting me because I've never tried it. When the wood is dry, decide if it's what you were hoping for.

That's right, you'll need to wait until the temperature in the jar is close to room temperature. It might take a few hours, but this is important. No, don't put ice in to cool it down, don't put it in your freezer...allow it to cool naturally and away from curious eyes. We'll label the side of the bottle, "Part 1".

There are so many different wood finishing techniques out there, but bleaching wood is one of my favorites. As you can see, the 2-part wood bleach formula can have dramatic results on just about any wood you can imagine. It's been so long since I've used the two part bleach, I can't remember how it was used but I can assure you it was done according to label instructions.

You must have got a bad batch Steve. 2 part wood bleach is powerful stuff. It will turn walnut bone white with 2 or 3 applications, just don't get any on you. From what I read on one site Kleen Strip discontinued their 1 quart size and only make it in gallon kits now.

I know there are purists out there that live and die by naturally colored wood, sometimes afraid to apply any finish. But if you want to get a better dye or stain in your wood, starting with a white surface does that for you. I have made a video that shows how I made a checkerboard using the 2-part solution. We'll now mix 2 parts distilled water with 1 part 5% distilled vinegar .